Altera Byteblaster Usb Driver For Mac

Hard setting RNDIS MAC address Description The RNDIS USB gadget is setup by default to randomly assign a host and device MAC every time it is loaded. For some cases it is necessary to set both to a static address. This guide will show how to do so. Steps Kernel The RNDIS USB gadget needs to be compiled as a module:. USB support - USB Gadget Support - USB Peripheral Controller - USB Gadget Drivers Ethernet Gadget (with CDC Ethernet support).

Hard setting RNDIS MAC address¶ Description¶ The RNDIS USB gadget is setup by default to randomly assign a host and device MAC every time it is loaded. For some cases it is necessary to set both to a static address. This guide will show how to do so. Dell latitude xt windows 10. Steps¶ Kernel¶ The RNDIS USB gadget needs to be compiled as a module. ByteBlaster II Download Cable User Guide - intel.com. Intel.com The Altera ByteBlaster kernel driver is re quired for Linux workstations running Red Hat Linux version 7.3 or 8.0 or Red Hat Enterprise Linux version 3.0 or later that use the ByteBlaster II download cable. Feb 24, 2012 - I am running windows 7 x32 on my mac via parallels 7. I got the Quartus 11.0 software from the university and it works fine but the USB blaster.

RNDIS support Linux Setting up /etc/modules-load.d Now that the RNDIS gadget is compiled as a module, linux needs to be setup to auto load the module on boot. This can be done by adding a.conf file in /etc/modules-load.d.

This file will have the name(s) of the module(s) to be loaded on boot. More than one module can be specified, each module needs to be on its own line in the.conf file. NOTE: create the directory if it doesn't already exist Example /etc/modules-load.d/rndis.conf gether Setting up /etc/modprobe.d The auto loaded module will need the arguments for the MAC addresses passed to it, this is done by adding a.conf file in /etc/modprobe.d. Example /etc/modprobe.d/rndis.conf options gether hostaddr=32:70:05:18:ff:78 devaddr=46:10:3a:b3:af:d9 The format is options modulename moduleparameters The devaddr is the address seen by the embedded device and hostaddr is the address seen by the machine connected to the embedded board.